ISO 2178-2016 pdf free.Non-magnetic coatings on magnetic substrates – Measurement of coating thickness – Magnetic method. This International Standard specifies a method for non-destructive measurements of the thickness of non-magnetizable coatings on magnetizable base metals. The measurements are tactile and non-destructive on typical coatings. The probe oran instrument with integrated probe is placed directly on the coating to be measured. The coating thickness is displayed on the instrument. In this International Standard the term coating is used for material such as, for example, paints and varnishes, electroplated coatings, enamel coatings, plastic coatings, powder coatings, claddings. NOTE This method can also be applied to the measurement of magnetizable coatings on non-magnetizable base metals or other materials (see ISO 2361). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2064, Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness ISO 4618, Paints and varnishes — Terms and definitions ISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions…

ISO/IEC 7816-8-2016 pdf free.ldentification cards – Integrated circuit cards一Part 8: Commands and mechanisms for security operations. This document specifies interindustry commands that may be used for security operations. This document also provides informative directives on how to construct security mechanisms with ISO/IEC 7816-4 defined commands. The choice and conditions of use of cryptographic mechanism in security operations may affect card exportability. The evaluation of the suitability of algorithms and protocols is outside the scope of this document. it does not cover the internal implementation within the card and/or the outside world. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/I EC 7816-4:2013, Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange 3 Terms and definitions For the purposes of this document, the following terms and definitions apply ISO and IEC maintain terminological databases for use in standardization at the following addresses: — IEC Electropedia: available at http:JJwww.electropedia.orgJ — ISO Online browsing platform:…

ISO/IEC 11801-6-2017 pdf free.Information technology – Generic cabling for customer premises – Part 6: Distributed building services. This part of ISO/lEG 11801 specifies generic cabling within premises that comprise single or multiple buildings on a campus. It covers balanced cabling and optical fibre cabling. This document has been prepared to reflect the increasing use of generic cabling in support of non-user specific services and the sharing of information between such services that can also incorporate the supply of power, including 1) telecommunications, e.g. wireless access points, distributed antenna systems, 2) energy management, e.g. lighting, power distribution, incoming utility metering. 3) environmental control, e.g. temperature, humidity, 4) personnel management. e.g. access control, cameras, PIR detectors, time and attendance monitoring, electronic signage, audio-visual projectors, 5) personal information and alarms, e.g. paging, patient monitoring, nurse call, infant security, 6) intelligent building systems. This document specifies directly or via reference to ISOIIEC 11801-1 a) the structure and configuration for generic cabling for distributed building services, b) the interfaces at the service outlet (SO), c) the performance requirements for cabling links and channels, d) the implementation requirements and options. e) the performance requirements for cabling components, f) the conformance requirements and verification procedures. Safety (e.g….

ISO 6707-2-2017 pdf free.Buildings and civil engineering works一Vocabulary一Part 2: Contract and communication terms. This document defines terms applicable to contracts and communication in relation to buildings and civil engineering works. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6707-1, Buildings and civil engineering works — Vocabulary — Part 1: General terms 3 Terms and definitions For the purposes of this document, the terms and definitions in Iso 6707-1 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: — IEC Electropedia: available at http://www.electropedia.org/ — ISO Online browsing platform: available at http://www.iso.org/obp NOTE Where terms in definitions are defined in this document, the relevant terms are in italics, and the term number is given after the relevant term. Where terms in definitions are defined in Iso 6707-1, the terms are also in italics but no term number is given. 3.1 Base terms relating to contracts and communication 3.1.1 contract…

ISO/IEC 7816-6-2016 pdf free.Identification cards一Integrated circuit cards一 Part 6: Interindustry data elements for interchange. This part of ISO/IEC 7816 specifies directly or by reference, data elements, including composite data elements that may be used in interindustry interchange. It identifies the following characteristics of each data element: — identifier; — name; — description and reference; — format and coding (if not available in other ISO standards or parts of lSO/IEC 7816). The layout of each data element is described as seen at the interface between the interface device and the card. This part of ISO/IEC 7816 provides the definition of data elements without consideration of any restrictions on the usage of the data elements. It does not cover the internal implementation within the card and/or the outside world. With the exception of login data objects (b). only application class tags are eligible in this part of ISO/IEC 7816. When using an interindustry template, an application is allowed to nest context-specific class tags (see ISO/IEC 78 16-4) under such a template unless it is previously marked as Reserved for Future Use ISO/IEC )TC 1/SC 17. 2 Normative references The following documents, in whole ui en pact, are normatively referenced in this document…

ISO 148-2-2016 pdf free.Metallic materials一Charpy pendulum impact test一Part 2: Verification of testing machines. This part of ISO 148 covers the verification of pendulum-type impact testing machines, In terms of their constructional elements, their overall performance and the accuracy of the results they produce. It is applicable to machines with 2 mm or 8 mm strikers used for pendulum impact tests carried out, for instance, in accordance with ISO 148-1. It can he applied to pendulum impact testing machines of various capacities and of different design. Impact machines used for industrial, general or research laboratory testing of metallic materials in accordance with this part of ISO 148 are referred to as industrial machines. Those with more stringent requirements are referred to as reference machines. Specifications for the verification of reference machines are found in 150 148-3. This part of ISO 148 describes two methods of verification. a) The direct method, which is static in nature, involves measurement of the critical parts of the machine to ensure that it meets the requirements of this part of ISO 148. Instruments used for the verification and calibration are traceable to national or international standards. b) The indirect method, which is dynamic in nature, uses…

ISO/IEC 27011-2016 pdf free.Information technology一Security techniques – Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations. Information is critical to cvcry organization. In the case of telecommunications, information consists of data transmitted between any two points in an electronic formation as well as metadata of each transmission, e.g.. positioning data of sender and receiver. Regardless of how the information is transmitted and whether it is cached or stored during transmission, information should always be appropriately protected. Telecommunications organizations and their information systems and networks are exposed to security threats from a wide range of sources. including: wire-tapping: advanced persistent threats: terrorism; espionage: sabotage: vandalism: information leakage; errors; and force majcure events. These security threats may originatc from inside or outside the telecommunications organization, resulting in damage to the organization Once information security is violated, e.g., by wire-tapping the telecommunications lines, the organization may suffer damage. Therefore, it is essential for an organization to ensure its information security by continual improvement of its information security management system (ISMS). Efkctivc information security is achieved by implementing a suitable set of controls based on those described in this Recommendation International Standard. These controls need to bc established. implemented,…

ISO/IEC 24760-3-2016 pdf free.Information technology一Security techniques一A framework for identity management-Part 3:Practice. Clause 5 presents practices to address identity related risk when operating an identity management system conforming to ISO/IEC 24760-1, ISO/IEC 24760-2 and ISO/IEC 29115. 5.2 Risk assessment One function of an identity management system is to manage the risk of identity errors, and the confidentiality, integrity and availability of identity information that it stores, processes and communicates. It is necessary to understand the level of risk, which will depend on the application. The owner of the application should conduct a risk assessment to determine the level of risk. The result will provide information, which can be used to determine the necessary risk management criteria and processes for the identity management system. The information an identity management system needs includes the level of assurance in identity information required and the requirements for confidentiality, integrity and availability of this information. ISO/IEC 24760-2 specifies tools to manage risks as policies, regulation, design and architecture. In some contexts involving consumers, protecting personally identifiable information and giving principals control over the use of their personally identifiable information is paramount. ISO/IEC 29100, ISO/IEC 29101, ISO/IEC 29134 and ISO/IEC 29151 (to be published) specify requirements and…

ISO/IEC 29134-2017 pdf free.Information technology一Security techniques一Guidelines for privacy impact assessment. This document gives guidelines for — a process on privacy impact assessments, and — a structure and content of a PIA report. It is applicable to all types and sizes of organizations, including public companies, private companies, government entities and not-for-profit organizations. This document is relevant to those involved in designing or implementing projects, including the parties operating data processing systems and services that process P11. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO Guide 73:2009, Risk management — Vocabulary lSO/IEC 27000:20 16, Information technology — Security techniques — Information security management systems — Overview and vocabulary ISO/IEC 29100:2011, Information technology — Security techniques — Privacy framework 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 29100, ISO/IEL 27000, ISO Guide 73 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following…

ISO/IEC 27050-3-2017 pdf free.Information technology一Security techniques一Electronic discovery一 Part 3: Code of practice for electronic discovery. This document provides requirements and guidance on activities in electronic discovery, including. but not limited to, identification, preservation, collection, processing, review, analysis and production of electronically stored information (ESI). In addition, this document specifies relevant measures that span the lifecycle of the ESI from its initial creation through to final disposition. This document is relevant to both non-technical and technical personnel involved in some or all of the electronic discovery activities. It is important to note that the requirements and guidance are not intended to contradict or supersede local jurisdictional laws and regulations and it is expected that care is exercised by the user to ensure compliance with the prevailing jurisdictional requirements. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 27000, Information technology — Security techniques — Information security management systems — Overview and vocabulary ISO/IEC 27050-1:2016, Information technology — Security techniques…