ISO/IEC 27050-3-2017 pdf free.Information technology一Security techniques一Electronic discovery一 Part 3: Code of practice for electronic discovery.
This document provides requirements and guidance on activities in electronic discovery, including. but not limited to, identification, preservation, collection, processing, review, analysis and production of electronically stored information (ESI). In addition, this document specifies relevant measures that span the lifecycle of the ESI from its initial creation through to final disposition.
This document is relevant to both non-technical and technical personnel involved in some or all of the electronic discovery activities. It is important to note that the requirements and guidance are not intended to contradict or supersede local jurisdictional laws and regulations and it is expected that care is exercised by the user to ensure compliance with the prevailing jurisdictional requirements.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 27000, Information technology — Security techniques — Information security management systems — Overview and vocabulary
ISO/IEC 27050-1:2016, Information technology — Security techniques — Electronic discovery — Part 1:
Overview and concepts
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 27000 and ISO/IEC 27050-
1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at http://www.iso.org.obp
— IEC Electropedia: available at http://www.electropedia.org/
4 Abbreviated terms
ESI Electronically stored information
ICT Information and communications technology
OCR Optical character recognition
Electronic discovery is an element of traditional discovery and it is a process that typically involves identifying, preserving, collecting, processing, reviewing, analysing, and producing electronically stored information (ESI) that may be potentially relevant to a particular matter. The requirements and recommendations provided in this document are in accordance with the electronic discovery concepts described in the following clauses and subclauses of ISO/IEC 27050-1.
— Clause 3, Terms and definition: Key electronic discovery terminology
— 6.2, Basic concepts: Electronic discovery issues and primary cost drivers
— 6.3, Objectives of electronic discovery: General electronic discovery objectives
— Clause 7, Electronically stored information (ESI): Common ESI types, common sources and representations
— Clause 8, Electronic discovery process: Description of the electronic discovery process and the process elements
ISO/I EC 27050-1 differentiates between generic actions such as “identifying” from the specific electronic discovery process elements by preceding the names with “ESI” (e.g. ESI identification). Likewise, this document follows this approach. Figure 1. repeated from ISO/IEC 27050-1, shows all of the electronic discovery process elements and the Interrelationships between them (see lSO/IEC 27050-1:2016, 8.1 for a full description).ISO/IEC 27050-3 pdf free download.
Tags: Code of practice for electronic discovery
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…