ISO 10360-7-2011 pdf download.Geometrical product specifications (GPS)- Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 7: CMMs equipped with imaging probing systems. This part of ISO 10360 specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to Cartesian CMMs using imaging probing systems of any type operating in the discrete-point probing mode. This part of ISO 10360 does not explicitly apply to: — non-Cartesian CMMs: however, parties may apply this part of ISO 10360 to non-Cartesian CMMs by mutual agreement; — CMMs using other types of optical probing: however, parties may apply this approach to other optical CMMs by mutual agreement; — CMMs using contact probing systems (see ISO 10360-2 for contact probing systems). This part of ISO 10360 specifies performance requirements that can be assigned by the manufacturer or the user of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated…

ISO/DIS 8062-4-2014 pdf free.Geometrical Product Specifications [GPS) – Dimensional and geometrical tolerances for moulded parts – Part 4: General tolerances for castings using profile tolerancing in a general datum system. This part of ISO 8062 specifies general geometrical tolerances for castings as well as machining allowances. as delivered to the purchaser in accordance with ISO 8062-2. It is applicable for the tolerancing of the geometry of castings in all cast metals and their alloys produced by various casting manufacturing processes. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1101, Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out ISO 1660, Geometrical product specification (GPS) — Dimensioning and tolerancing of profiles ISO 2692, Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) ISO 5458, Geometrical product specification (GPS) — Geometrical tolerancing — Positional tolerancing ISO 5459, Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and…

ISO 1-2016 pdf free.Geometrical product specifications (GPS) – Standard reference temperature for the specification of geometrical and dimensional properties. ISO 1 defines the concepts of a reference temperature and of the standard reference temperature, and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece. This International Standard is also applicable to the definition of the measurand used in verification or calibration. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 reference temperature temperature of an object, having a uniform temperature, specified as part of the definition of a geometrical or dimensional property Note ito entry: The specification of a geometrical or dimensional property is typically given in technical product documentation, e.g., on an engineering drawing or In a CAD file, or In the specification of the measurand (the quantity intended to be measured). 2.2 standard reference temperature internationally agreed-upon reference temperature Note 1 to entry: In prior editions of this International Standard, the term “standard reference temperature was defined as its assigned numerical value,…

BS EN ISO 1:2016 pdf free.Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2016). BS EN ISO 1 defines the concepts of a reference temperature and of the standard reference temperature, and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece. This International Standard is also applicable to the definition of the measurand used in verification or calibration. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 reference temperature temperature of an object, having a uniform temperature, specified as part of the definition of a geometrical or dimensional property Note ito entry: The specification of a geometrical or dimensional property is typically given in technical product documentation, e.g., on an engineering drawing or in a CAD file, or in the specification of the measurand (the quantity intended to be measured). 2.2 standard reference temperature internationally agreed-upon reference temperature Note 1 to entry: In prior editions of this International Standard, the term “standard reference temperature was defined…

ISO 3040:2016 pdf free download.Geometrical product specifications (GPS) Dimensioning and tolerancing Cones Spécifi cation géométrique des produ its (GPS) — Cotation et tolérancement — Cones. This ISO 3040 specifies graphical indication applicable to a cone (right-angle circular cones) to define its dimensioning or to specify its tolerancing. For the purposes of this International Standard, the term “cone” relates to right-angle circular cones only (any intersection by a plane perpendicular to the axis of the nominal cone is a circle). NOTE 1 For simplicity, only truncated cones have been represented in this International Standard. However, this International Standard can be applied to any type of cone within its scope. NOTE 2 This International Standard is not intended to prevent the use of other methods of dimensioning and tolerancing. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1119:20 11, Geometrical product specifications (GPS) — Series of conical tapers and taper angles ISO 81714-1, Design of graphical symbols for use in the technical documentation of…