BS ISO 11197:2016 pdf free.Medical supply units. IEC 60601-1:2005.A1:2012, 1.4 applies with cue following additions: The numbering of sections, clauses and subclauses of this particular standard corresponds to that of IEC 6060 1- 1:2005+A1:2012 with the prefix “201” (e.g. 201.1 in this standard addresses the content of IEC 60601- 1:2005+A1:2012 Clause 1) or applicable collateral standard with the prefix 20x where x is the final digit(s) of the collateral standard document number (e.g. 202.4 in this particular standard addresses the content of Clause 4 of the IEC 60601-1-2 collateral standard, 203.4 in this particular standard addresses the content of Clause 4 of the IEC 60601-1-3 collateral standard, etc.). The changes to the text of IEC 60601-1:2005+A1:2012 are specified by the use of the following words: ‘Replacement means that the clause or subclause of IEC 6060 l-1:2005+A1:2012 or applicable collateral standard is replaced completely by the text of this particular standard. Addition” means that the text of this particular standard is additional to the requirements of IEC 60601-1:2005+A1:2012 or applicable collateral standard. AmendmentN means that the clause or subclause of IEC6O6OI-1:2005+A1:2012 or applicable collateral standard is amended as indicated by the text of this particular standard. Subclauses or figures which are…

ISO 4628-3-2016 pdf free.Paints and varnishes – Evaluation of degradation of coatings一Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 3: Assessment of degree of rusting. This part of Iso 4628 specifies a method for assessing the degree of rusting of coatings by comparison with pictorial standards. The pictorial standards provided in this part of Iso 4628 show coated steel surfaces which have deteriorated to different degrees by a combination of rust broken through the coating and visible underrust. NOTE 1 The pictorial standards have been selected from the European rust scale published by the European Confederation of Paint, Printing Ink and Artists’ Colours Manufacturers’ Associations (CEPE), Brussels. The correlation between the ISO scale and the “European rust scale is given in Annex B. Table B.1. NOTE 2 The correlation between the ISO scale and the rating system of ASTM D 610 is given in Annex B. Table 8.2. NOTE 3 The rust formation on uncoated steel surfaces is designated in accordance with ISO 850 1-1 (rust grades A, B, C. and D). ISO 4628-1 defines the system used for designating the quantity and size of defects and the intensity of changes…

ISO 148-1-2016 pdf free.Metallic materials一Charpy pendulum impact test一Part 1: Test method. 8.3.1 Unless otherwise specified, tests shall be carried out at 23 °C ± 5 °C (ambient temperature). If a temperature is specified, the test piece shall be conditioned to a temperature within ±2 °C. 8.3.2 For conditioning (heating or cooling) using a liquid medium, the test piece shall be positioned in a container on a grid that is at least 25 mm above the bottom of the container and covered by at least 25 mm of liquid, and be at least 10 mm from the sides of the container. The medium shall be constantly agitated and brought to the specified temperature by any convenient method. The device used to measure the temperature of the medium should be placed in the centre of the group of test pieces. The temperature of the medium shall be held at the specified temperature within ±1 °C for at least 5 mm. NOTE When a liquid medium is near its boiling point, evaporative cooling can dramatically lower the temperature of the test piece during the interval between removal from the liquid and fracture.IBi 8.3.3 For conditioning (heating or cooling) using a gaseous medium, the…

ISO 148-3-2016 pdf free.Metallic materials一Charpy pendulum impact test 一 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines. This part of Iso 148 specifies the requirements, preparation and methods for qualifying test pieces used for the indirect verification of pendulum impact testing machines in accordance with ISO 148-2. It specifies notched test pieces with nominal dimensions identical to those specified in ISO 148-1; however, the tolerances are more stringent. NOTE 1 The chemical composition or heat treatment, or both, are varied according to the energy level desired. NOTE 2 Reference test pieces are qualified on reference pendulum impact testing machines which are also described in this part of ISO 148. 2 Normative references The following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method ISO 148-2, Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines 3 Terms and definitions For the…

ISO 4046-3-2016 pdf free.Paper, board, pulps and related terms一 Vocabulary一 Part 3: Paper-making trminology. on-machine créping wet or dry crêping process performed on the paper machine Cf. dry créping. wet créping, off-machine créping 3.94 outturn sheet sheet of paper or board, taken during manufacture serving as a reference for the miii or client 3.95 paper generic term for a range of materials in the form of a coherent sheet or web, excluding sheets or laps of pulp as commonly understood for paper making or dissolving purposes and non-woven products, made by deposition of vegetable, mineral, animal or synthetic fibres, or their mixtures, from a fluid suspension onto a suitable forming device, with or without the addition of other substances cf. sheet, web NOTE 1 Papers may be coated, impregnated or otherwise converted, during or after their manufacture, without necessarily losing their identity as paper. In conventional papermaking processes, the fluid medium is water; new developments, however, include the use of air and other fluids. NOTE 2 In the generic sense, the term paper may be used to describe both paper and board as defined in this part of ISO 4046. The primary distinction between paper and board is normally based…

ISO/IEC 27009-2020 pdf free.Information security, cybersecurity and privacy protection – Sector-specific application of ISO/IEC 27001 – Requirements. This document specifies the requirements for creating sector-specific standards that extend ISO/IEC 27001, and complement or amend ISO/IEC 27002 to support a specific sector (domain, application area or market). This document explains how to: 一include requirements in addition to those in ISO/IEC 27001, 一refine or interpret any of the ISO/IEC 27001 requirements, 一include controls in addition to those of ISO/IEC 27001:2013, Annex A and ISO/IEC 27002, 一modify any of the controls of ISO/IEC 27001:2013, Annex A and ISO/IEC 27002, 一add guidance to or modify the guidance of ISO/IEC 27002. This document specifies that additional or refined requirements do not invalidate the requirements in ISO/IEC 27001. This document is applicable to those involved in producing sector-specific standards. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirement of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies, ISO/IEC 27000, Information technology 一Security techniques一Information security management systems一Overview and vocabulary ISO/IEC 27001, Information technology一Security techniques –…

ISO/IEC 27050-1-2016 pdf free.Information technology一Security techniques一Electronic discovery – Part 1: Overview and concepts. Electronic discovery is the process of discovering pertinent Electronically Stored Information (ESI) or data by one or more parties involved in an investigation or litigation, or similar proceeding. This document provides an overview of electronic discovery. In addition, it defines related terms and describes the concepts, including, but not limited to, identification, preservation, collection, processing, review, analysis, and production of ESI. This document also identifies other relevant standards (e.g. ISO/IEC 27037) and how they relate to, and interact with, electronic discovery activities. This document is relevant to both non-technical and technical personnel involved in some or all of the. electronic discovery activities, and it is not intended to contradict or supersede local jurisdictional laws. and regulations, so exercise care to ensure compliance with the prevailing jurisdictional requirements. 2 Normative references There are no normative references in this document. 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 27000 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: 一IEC Electropedia: available at htp://ww.electropedia.org/ 一ISO Online browsing platform: available at http:// www.iso.org.obp…

ISO 669-2016 pdf free.Resistance welding一Resistance welding equipment一Mechanical and electrical requirements. ISO 669 defines and specifies certain identified electrical and mechanical characteristics of equipment used for resistance spot welding, projection welding, resistance seam welding, upset welding, and flash welding. This International Standard specifies the information to be given in equipment specifications and the test methods to be used for measuring those characteristics. Not all requirements apply to all types of equipment. The following types of power sources are included: 一一single phase with alternating welding current; single phase with rectified welding current by rectification of the output of the welding transformer; -single phase with inverter welding transformer; three phase with rectified welding current by rectification of the output of the welding transformer; -three phase with a current rectification in the input of the welding transformer (sometimes called frequency convertor); ， three phase with inverter welding transformers. This International Standard does not apply to welding transformers that are separate from the equipment. NOTE Safety requirements for resistance welding equipment are covered by IEC 62135-1. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition…

ISO TR 9210:2017 pdf free.Hydrometry一Measurement in meandering river and in streams with unstable boundaries. This document provides guidelines for discharge measurements in meandering and braided rivers, and from bridges, following the provisions of ISO 748. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 772. Hydrometry — Vocabulary and symbols 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 772 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at http://www.iso.org/obp — I EC Electroped Ia: available at http://www.electropedia.org/ 3.1 alluvial river river, which flows through alluvium, formed from its own deposits Note I to entry: The sediment carried by an alluvial river, except for the wash load, is similar to that in the bed. 3.2 braided river river characterized by a wide and shallow open channel, in which flow passes through a number of…

ISO/IEC 27000-2016 pdf free.Information technology一Security techniques一Information security management systems一Overview and vocabulary. Organizations of all types and sizes: a) collect, process, store, and transmit information; b) recognize that information, and related processes, systems, networks and people are important assets for achieving organization objectives; c) face a range of risks that may affect the functioning of assets; and d) address their perceived risk exposure by implementing information security controls. All information held and processed by an organization is subject to threats of attack, error, nature (for example, flood or fire), etc., and is subject to vulnerabilities inherent in its use. The term information security is generally based on information being considered as an asset which has a value requiring appropriate protection, for example, against the loss of availability, confidentiality and integrity. Enabling accurate and complete information to be available in a timely manner to those with an authorized need is a catalyst for business efficiency. Protecting information assets through defining, achieving, maintaining, and improving information security effectively is essential to enable an organization to achieve its objectives, and maintain and enhance its legal compliance and image. These coordinated activities directing the implementation of suitable controls and treating unacceptable information security risks are…