ISO/IEC 7816-8-2016 pdf free.ldentification cards – Integrated circuit cards一Part 8: Commands and mechanisms for security operations.
This document specifies interindustry commands that may be used for security operations. This document also provides informative directives on how to construct security mechanisms with ISO/IEC 7816-4 defined commands.
The choice and conditions of use of cryptographic mechanism in security operations may affect card exportability. The evaluation of the suitability of algorithms and protocols is outside the scope of this document. it does not cover the internal implementation within the card and/or the outside world.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/I EC 7816-4:2013, Identification cards — Integrated circuit cards — Part 4: Organization, security and commands for interchange
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:JJwww.electropedia.orgJ
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1 asymmetric key pair pair of elements belonging to cryptographic techniques that use two related operations: a public operation defined by public numbers or by a public key and a private operation defined by private numbers or by a private key
Note I to entry: The two operations have the property that, given the public operation, it is computationally Infeasible to derive the private operation.
3.2 certificate digital signature (13) binding a particular person or object and its associated public key
Note 1 to entry: The entity issuing the certificate also acts as tag allocation authority with respect to the data elements in the certificate.
[SOURCE: ISO/IEC 7816-4:2012, 3.11, modified]
3.3 digital signature data appended to, or cryptographic transformation of, a data string that proves the origin and the
integrity of the data string and protect against forgery, e.g. by the recipient of the data string
[SOURCE: ISO/IEC 7816-4:2012, 3.21]
3.4 key sequence of symbols controling a cryptographic operation (e.g. encipherment, decipherment, a private
or a public operation in a dynamic authentication, signature production, signature verification)
[SOURCE: ISO/IEC 7816-4:2012, 3.32]
3.5 non-self-descriptive certificate certificate (3.2) consisting of a concatenation of data elements associated to a header list or extended
header list, describing the structure of the certificate
3.6 self-descriptive certificate certificate (3.2]) consisting of a concatenation of data objects
3.7 secure messaging set of means for cryptographic protection of (parts of) command-response pairs.ISO/IEC 7816-8 pdf free download.
Tags: ldentification cards
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…