ISO 10816-21-2015 pdf free.Mechanical vibration – Evaluation of machine vibration by measurements on non-rotating parts – Part 21:Horizontal axis wind turbines with gearbox. This part of Iso 10816 specifies the measurement and evaluation of mechanical vibration of wind turbines and their components by taking measurements on non-rotating parts. It applies to horizontal axis wind turbines with mechanical gearbox and rated generator output exceeding 200 kW and the following design and operational characteristics: a) installation on supporting systems (tower and foundation) made of steel and/or concrete; b) horizontal axis rotor with several rotor blades; c) rotor bearing separate from or integrated into the gearbox; d) generators driven via gearbox; e) generators of the synchronous or asynchronous type (mostly equipped with 4-pole generator); f) generators with only a fixed pole number or which are pole-changeable for speed adjustment; g) output control by rotor blades (pitch or stall wind turbines); h) generator coupled to the power grid via converter or directly. This part of ISO 10816 recommends zones for evaluating the vibration at continuous load operation. However, in most cases, these evaluation zone boundaries might not be suitable for the early detection of faults. This part of ISO 10816 does not specify vibration…

ISO 17634-2015 pdf free.Welding consumables – Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels – Classification. ISO 17634 specifies requirements for classification of tubular cored electrodes used in the post-weld heat-treated condition for gas shielded metal arc welding of creep-resisting and low alloy elevated temperature steels. One tubular cored electrode can be tested and classified with different shielding gases. This International Standard is a combined specification providing for classification utilizing a system based upon the chemical composition of all-weld metal or utilizing a system based upon the tensile strength and the chemical composition of all-weld metal. 1) Paragraphs and tables which carry the suffix letter are applicable only to tubular cored electrodes classified to the system based upon chemical composition with requirements for the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard. 2) Paragraphs and tables which carry the suffix letter ‘B are applicable only to tubular cored electrodes classified to the system based upon the tensile strength and chemical composition of all- weld metal in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter A nor the suffix…

ISO 8536-11-2015 pdf free.Infusion equipment for medical use 一 Part 11: Infusion filters for single use with pressure infusion equipment. This part of ISO 8536 applies to sterilized infusion filters for single use used up to 200 kPa (2 bar) on fluid lines of pressure infusion equipment and infusion set as specified in ISO 8536-8. It does not include the effectiveness of filters for separation of particles or germs. In some countries, the national pharmacopoeia or other national regulations are legally binding and take precedence over this part of ISO 8536. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 594-2,flConical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings ISO 7000, Graphical symbols for use on equipment — Registered symbols ISO 8536-4:2010, Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed ISO 10993-4, Biological evaluation of medical devices — Part 4: Selection of tests for interactions…

ISO 3245-2015 pdf free.Rolling bearings一Needle roller bearings with drawn cup and without innerring – – Boundary dimensions, geometrical product specifications [GPS] and tolerance values. ISO 3245 specifies the boundary dimensions and preferred dimensions to be used for drawn cup needle roller bearings without inner ring as well as the minimum chamfer dimension limits. Also specified are the closed end thickness dimensions for hearings with one closed end. In addition, dimensional tolerances for the needle roller complement bore diameter and tolerances for the drawn cup width are specified. Informative values for the tolerances for shaft raceway and housing bore are given in AnnexA. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1132-1, Rolling bearings — Tolerances — Part 1: Terms and definitions ISO 5593, Rolling bearings — Vocabulary ISO 10579, Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts ISO 14405-1, Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes ISO 15241, Rolling bearings — Symbols for physical…

ISO 10976-2015 pdf free.Refrigerated light hydrocarbon fluids一Measurement of cargoes on board LNG carriers. ISO 10976 establishes all of the steps needed to properly measure and account for the quantities of cargoes on liquefied natural gas (LNG) carriers. This includes, but is not limited to. the measurement of liquid volume, vapour volume, temperature and pressure, and accounting for the total quantity of the cargo on board. This International Standard describes the use of common measurement systems used on board LNG carriers, the aim of which is to improve the general knowledge and processes in the measurement of LNG for all parties concerned. This International Standard provides general requirements for those involved in the LNG trade on ships and onshore. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8310, Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank thermometers on board marine carriers and floating storage ISO 8943, Refrigerated light hydrocarbon fluids — Sampling of liquefied natural gas —…

ISO 9000:2015 pdf free.Quality management systems – Fundamentals and vocabulary. ISO 9000 describes the fundamental concepts and principles of quality management which are universally applicable to the following: • — organizations seeking sustained success through the implementation of a quality management system: • — customers seeking confidence in an organization’s ability to consistently provide products and services conforming to their requirements; • — organizations seeking confidence in their supply chain that product and service requirements will be met; • — organizations and interested parties seeking to improve communication through a common understanding of the vocabulary used in quality management: • — organizations performing conformity assessments against the requirements of ISO 9001; • — providers of training, assessment or advice in quality management; • — developers of related standards. This International Standard specifies the terms and definitions that apply to all quality management and quality management system standards developed by ISOITC 176. Only informative sections of standards are publicly available. To view the full content, you will need to purchase the standard by clicking on the “Buy” button. 3 Terms and definitions 3.1 Terms related to person or people 3.1.1 top management person or group of people who directs and controls…

ISO 3826-4-2015 pdf free.Plastics collapsible containers for human blood and blood components – Part 4:Aphaeresis blood bag systems with integrated features. This part of Iso 3826 specifies requirements including performance requirements for aphaeresis blood bag systems with integrated features. Aphaeresis blood bag systems need not contain all of the integrated features identified in this part of ISO 3826. The integrated features refer to: — needle stick protection device; — leucocyte filter; — sterile barrier filter; — pre-coflection sampling device; — red blood cell storage bag; — plasma storage bag; — platelet storage bag; — polymorphonucleic (e.g. stem) cell storage bag; — post-collection sampling devices; and — connections for storage solutions, anticoagulant, and replacement fluid. This part of ISO 3826 specifies additional requirements for blood bag systems used to collect varying quantities of blood components or cells by apheresis. This part of ISO 3826 can be used on automated or semi-automated blood collection systems. In some countries, the national pharmacopoeia or other national regulations are legally binding and take precedence over this part of 150 3826. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated…

ISO 6892-3-2015 pdf free.Metallic materials一Tensile testing一 Part 3: Method of test at low temperature. This part of ISO 6892 specifies a method of tensile testing of metallic materials at temperatures between +10 °C and -196 °C. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6892-1:2009, Metallic materials — Tensile testing — Part 1: Method of test at room temperature ISO 7500-1, Metallicmaterials— Verification ofstaticuniaxialtestingmachines— Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system ISO 9513, Metallic materials — Calibration of extensometer systems used in uniaxial testing 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 6892-1:2009 and the following apply. In general, all test piece geometries/dimensions are based on measurements taken at room temperature. The exception can be the extensometer gauge length (see 3). NOTE The following properties are generally not determined at low temperature unless required by relevant specifications or agreement: — permanent set strength (R1); — percentage permanent…

ISO 16130-2015 pdf free.Aerospace series一Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test). ISO 16130 applies to the dynamic testing of the locking behaviour of bolted connections in order to investigate the self-loosening behaviour of fasteners for aerospace applications and is mainly intended for development work. As test apparatuses are different (e.g. stiffness distribution), testing In accordance with this International Standard, therefore, does not allow an absolute statement to be made on the locking behaviour of bolted assemblies under service loads. Thus, the objective of this test is a comparative evaluation of locking elements under defined test conditions. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 16047, Fasteners — Torque/clamp force testing 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 16047 and the following apply. 3.1 clamp force axial tension acting on the bolt shank or compression acting on the clamped member (SOURCE: ISO 16047:2005, 3.1; modified…

ISO 3160-2-2015 pdf free.Watch-cases and accessories – Gold alloy coverings – Part 2: Determination of fineness, thickness, corrosion resistance and adhesion. This part of Iso 3160 specifies methods to determine fineness, thickness, corrosion resistance and adhesion for gold alloy coverings on watch-cases and accessories, including bracelets when they are permanently attached to the case. The tests apply only to significant surfaces. This part of ISO 3160 applies to all gold alloy coverings specified in ISO 3160-1. 2 Normative references The Following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Iso 1463, Metallic and oxide coatings — Measurement of coating thickness — Microscopical method Iso 2177, Metallic coatings — Measurement of coating thickness — C’oulometric method by anodic dissolution ISO 3 160-1. Watch-cases and accessories — Gold alloy coverings — Part 1: General requirements ISO 3497, Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods ISO 3543, Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter in et hod ISO 3868, Metallic and other non-organic…