AS 4485.2:2021 pdf free.Security for healthcare facilities Part 2: Procedures guide. AS 4485.2 provides guidance and explanatory material to assist with the implementation of the requirements of AS 4485.1. 1.2 Normative references There are no normative references in this document. NOTE Documents for informative purposes are listed in the Bibliography. 1.3 Terms and definitions For the purpose of this Standard, the terms and definitions given in AS 4485.1 and the following definitions apply. 1.3.1 attractive asset item which is vital to the operations of the facility, has a high monetary value or is o a particularly attractive nature (e.g. jewellery or drug holdings) 1.3.2 burglar resistant areas areas which are secured in a manner suitable for the handling of money, drugs and other attractive assets to a level which will resist entry by an experienced criminal deliberately trying to force entry with suitable equipment 1.3.3 chief executive officer CEO position at that level of responsibility and authority immediately below the facility’s governing body or authority, or proprietor 1.3.4 intruder resistant areas areas which are secured in a manner suitable for the handling and storage of property of value to the facility and hazardous materials, to a level that will resist…

AS 5236.1:2021 pdf free download.Cranes – Limiting and indicating devices Part 1: General (ISO 10245-1 :2008, MOD). This part of ISO 10245 specifies general requirements for limiting and indicating devices for cranes that are applicable to loads and motions, performance and environment. These devices restrict operation and/or provide the operator or other persons with operational information. The specific requirements for the various types of crane are given in the other parts of ISO 10245. It is emphasized that the safe and reliable operation of limiters and indicators depends upon regular inspection and maintenance. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4306-1, Cranes — Vocabulary — Part 1: General 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 4306-1 and the following apply. 3.1 anti-collision device device used to prevent cranes or parts of cranes from colliding with a fixed load-lifting attachment when they are manoeuvred simultaneously in the same space Note 1 to entry: A working space limiter may perform the…

AS 61869.14:2021 pdf free download.Instrument transformers Part 14: Additional requirements for current transformers for DC applications (IEC 61869-14:2018 (ED 1.0) MOD). This part of IEC 61869 provides all requirements specific to current transformers to be used in DC applications (DCCTs), whatever the technology used. The output signal can be analogue or digital. It is applicable to newly manufactured current transformers used for measuring, protection and/or control applications in DC power systems with a rated voltage above 1,5 kV. The general configuration of a single-pole low-power instrument transformer is described in Figure 601 of IEC 61869-6:2016. The DCCTs intended for current measurement in the transistor branch of the VSC valve (referred to as CT4a and CT4b in Figure 1403 and Table 1402) are not covered by this document, and will be considered in a future revision. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Clause 2 of IEC 61869-6:2016 is applicable, with the following additions and modifications: IEC TS…

AS EN 14974:2021 pdf free download.Skateparks一Safety requirements and test methods. This document applies to skateparks for public use intended for the use of skateboards, other roller sports equipments and BMX bikes. It specifies safety requirements and requirements for testing and marking, information supplied by the manufacturer, information for users, as well as for inspection and maintenance to protect users and third parties (e.g. spectators) from hazards, as far as possible, when using a skatepark as intended, or as can be reasonably expected. This standard does not apply to bike facilities modelled from ground, gravel or rock. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 206, Concrete — Specification, performance, production and conformity EN 300:2006, Oriented Strand Boards (OSB) — Definitions, classification and specifications EN 312, Particleboards — Specifications EN 335:2013, Durability of wood and wood-based products — Use classes: definitions, application to solid wood and wood-based products EN 338:2016, Structural timber — Strength classes EN 35 1-1,…

ISO 5721-1-2013 pdf free.Agricultural tractors一Requirements, test procedures and acceptance criteria for the operator’s field of vision一 Part 1: Field of vision to the front. This part of ISO 5721 specifies the requirements, test procedures and acceptance criteria for the field of vision to the front of the operator of agricultural tractors. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 5353:1995, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 field of vision area which can be viewed from the seated operators eye position 3.1.1 direct field of vision visibility by direct line of sight as determined by the light from the light source 3.1.2 indirect field of vision visibility with the aid of mirrors or with other visual aids such as closed circuit television cameras (LU VJ 3.2 semi-circle of vision to the front semi-circle described by a radius of…

ISO 5208-2015 pdf free.Industrial valves一Pressure testing of metallic valves. ISO 5208 specifies examinations and tests that a valve manufacturer needs to act upon in order to establish the integrity of the pressure boundary of an industrial metallic valve and to verify the degree of valve closure tightness and the structural adequacy of its closure mechanism. This International Standard is intended to be applied in conjunction with the specific requirements of a valve product standard to the extent cited by the product standard as a normative reference. Where requirements of a product standard differ from those given in this International Standard, the requirements of the product standard apply. This International Standard is not applicable to the safety aspects of pressure testing. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 shell test test at a pressure in excess of the cold working pressure (2.9) rating of a valve for the purpose of validating the soundness and strength of the valve pressure containing and retaining structures Note I to entry: These structures include valve-actuating mechanisms that have a direct connection to the valve internals subject to fluid test pressure within the valve proper. 2.2…

AS ISO 7457:2021 pdf free.Earth-moving machinery一Determination of turning dimensions of wheeled machines. AS ISO 7457 specifies methods for determining the turning radius, turning diameter, machine clearance diameter, and inside and outside tyre clearance diameters, described in the horizontal plan by a wheeled earth-moving machine with its equipment and attachments when executing a turn. This International Standard is applicable to all types of steerable wheeled earth-moving machinery. It is applicable irrespective of the type of steering used. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of I EC and ISO maintain registers of currently valid International Standards. ISO 50 10:1992, Earth-moving machinery — Rubber-ty red machines — Steering requirements. ISO 6165:1997, Earth-moving machinery — Basic types — Vocabulary. ISO 9248:1992, Earth-moving machinery — Units for dimensions, performance and capacities, and their measurement accuracies. 3 Definitions For the purposes of this International Standard, the definitions given in…

AS ISO 7451:2021 pdf free.Earth-moving machinery – Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders. AS ISO 7451 specifies a method for estimating the volume of materials which a hoe- type or grab-type bucket of a hydraulic excavator or backhoe loader can normally contain. The volume assessments are based on the internal dimensions of the bucket and on the representative volumes at the top of the bucket. The method employs the technique of dividing the complex shape of the material in the bucket into simple geometric shapes. This method of assessment is intended to provide a conventional means of comparing bucket capacities. It is not intended to be used to define true capacities. This International Standard is not applicable to buckets of cable excavators. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 hydraulic excavator self-propelled machine on crawlers, wheels or legs, having an upper structure capable of a 3600 swing with mounted equipment and which is primarily designed for excavating with a bucket, without movement of the undercarriage during the work cycle Note I to entry: An excavator work cycle normally comprises excavating, elevating, swinging and…

AS ISO 7132:2021 pdf free.Earth-moving machinery一Dumpers一Terminology and commercial specifications. AS ISO 7132 establishes a terminology for, and the content of, commercial literature specifications for self-propelled dumpers (including compact dumpers), as defined in ISO 6165, used in earth moving. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Iso 3450, Earth-moving machinery — Braking systems of rubber-tyred machines — Systems and performance requirements and test procedures ISO 5010, Earth-moving machinery — Rubber-tyred machines — Steering requirements ISO 6014:1986, Earth-moving machinery — Determination of ground speed ISO 6016:1998, Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components ISO 6165, Earth-moving machinery — Basic types — Vocabulary ISO 6483:1980, Earth-moving machinery — Dumper bodies — Volumetric rating ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 7457:1997, Earth-moving machinery — Determination of turning dimensions of wheeled machines ISO 9249:1997, Earth-moving machinery — Engine test code — Net power 3 Terms and definitions For the purposes of this document, the terms and definitions…

AS ISO 6746.1:2021 pdf free.Earth-moving machinery – Definitions of dimensions and codes Part 1: Base machine. This part of ISO 6746 defines certain dimensions of earth-moving base-machines as well as the codes identifying those dimensions. At the same time, it specifies a reference system for defining, and a coding system for identifying, additional, similar dimensions in terminology standards and commercial specifications. It is applicable to the basic types of earth-moving machinery as defined in ISO 6165. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated relèrences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6165, Earth-moving machinery — Basic types — Vocabulary 3 Terms and definitions For the purposes of this part of ISO 6746. the terms and definitions given in ISO 6165 and the following apply. 3.1 three-dimensional reference system system used to determine dimensions of earth-moving machines SEE: 3.1.1 zero Y plane vertical plane which passes through the longitudinal centreline of the machine 3.1.2 X plane any vertical plane perpendicular to the Y plane 3.1.3 Z plane any horizontal plane perpendicular to the X and Y planes 3.1.4…