ISO 6362-1-2012 pdf free.Wrought aluminium and aluminium alloys – Extruded rods/bars, tubes and profiles – Part 1: Technical conditions for inspection and delivery.
This part of ISO 6362 specifies the technical conditions for inspection and delivery of wrought aluminium and
aluminium alloy rods/bars, tubes and profiles for general engineering applications.
II applies to extruded products, but does not apply to the following:
— forging stock;
— extruded precision profiles in alloys A6060 and A6063;
— products delivered in coils;
— coiled tubes cut to lengths.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6362-2, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
ISO 6362-3, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
ISO 6362-4. Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
ISO 6362-5. Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round. square and hexagonal bars — Tolerances on shape and dimensions
ISO 6362-6, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round. square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
ISO 6362-7, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
ISO 7438, Metallic materials — Bend test
ISO 9591, Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
EN 2004-1, Aerospace series — Test methods for aluminium arid aluminium alloy products — Part 1: Determination of electrical conductivity of wrought aluminium alloys
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
rod. bar
solid wrought product of uniform cross-section along its whole length, supplied in straight lengths NOTE 1 Rod is normally less than 6 mm in diameter or minor dimension, NOTE 2 In North America, the minimum diameter of a rod is 9,525 mm (0,375 in). Below this limit the product is called wire.
NOTE 3 The cross-sections are in the shape of circles, squares, rectangles or regular hexagons. Products with a square, rectangular or hexagonal cross-section may have corners rounded along their whole length.
NOTE 4 For rectangular bars, the thickness exceeds one-tenth of the width. The term rectangular bar includes flattened circles” and modified rectangles. of which two opposite sides are convex arcs, the other two sides being straight, of equal length and paralle[
3.2 tube hollow wrought product of uniform cross-section with only one enclosed void along its whole length, and with
a uniform wall thickness, supplied in straight lengths or in coiled form, provided the inner and outer cross-
sections are concentric and have the same form and orientation
NOTE The cross-sections are in the shape of circles, squares, rectangles or regular hexagons. Hollow products with square, rectangular or regular hexagonal cross-sections may have corners rounded along their whole length.
3.3 profile wrought product of uniform cross-section along its whole length, with a cross-section other than rod/bar, tube, sheet or strip, supplied in straight lengths or in coiled form and where the product is long in relation to its cross- sectional dimensions
NOTE According to the form of its cross-section, it is called:
a) hollow profile: the cross-section includes either one enclosed void, provided that the cross-section is other than tube, or more than one enclosed void;
b) solid profile: the cross-section does not include any enclosed void.
3-4 inspection lot consignment, or a part thereof, submitted for inspection. comprising products of the same grade or alloy, form, temper, size, shape, thickness or cross-section and processed in the same manner
4 Orders or tenders
The order or tender shall define the product required and shall contain the following:
a) the type and form of product:
— the designation of the aluminium or aluminium alloy:
— the form of the product (rod/bar, tube, profile. etc.);
b) the metallurgical temper of the material for delivery (degree of hardness or heat-treatment condition) and, if different, the metallurgical temper for use;
C) the number of this International Standard or specification number, or, where none exists, the properties agreed between the supplier and the purchaser:
d) the dimensions and shape of the product (thickness, width, length, diameter); and/or reference to a drawing defining the product;
e) tolerances of the dimensions and form, with reference to the appropriate International Standard;
f) quantity;
g) any requirements for certificates of conformity, test and/or analysis:
h) any special requirements agreed between the supplier and the purchaser (for example drawings).
5 Requirements
5.1 Production and manufacturing processes
Unless otherwise specified in the order, the production and manufacturing processes shall be left to the discretion of the producer Unless it is explicitly stated otherwise in the order, no obligation shall be placed on the producer to use the same processes for subsequent and similar orders.ISO 6362-1 pdf free download.