BS ISO 8178-6:2018 pdf free.Reciprocating internal combustion engines – Exhaust emission measurement. Table A.1 includes the information essential for engine approval, such as engine identification, engine application, test cycle and test identification. The emission test results may be listed for different test cycles, if applicable. The gaseous and particulate emissions shall be expressed in grams per kilowatt hour whenever possible. Other units shall be indicated if used according to the provisions laid down in the Scope of this document. The smoke test results shall be listed for the smoke cycle applicable to the indicated application. The smoke values shall be expressed per metre whenever possible. 5.3 Engine information Table A.2 contains the basic features of the engine under test. If more information is requested by other parties, this can be provided. Table A.3 contains other information on the engine under test pertinent to the identification of the engine family or group. These features are derived from ISO 8178-7 for engine family and ISO 8178-8 for engine group. If the engine family or group concept does not apply for the engine under test, Table A.3 does not need to be submitted. 5.4 Ambient and engine test data For steady-state discrete mode…