ISO/TS 37151-2015 pdf free.Smart community infrastructures 一 Principles and requirements for performance metrics.
This Technical Specification gives principles and specifies requirements for the
— definition,
— identification,
— optimization, and
— harmonization
of community Infrastructure performance metrics, and gives recommendations for analysis, including
— smartness,
— interoperability.
— synergy,
— resilience,
— safety,and
— security
of community infrastructures.
Community infrastructures include, hut are not limited to, energy, water, transportation, waste, and ICT.
The principles and requirements of this Technical Specification are applicable to communities of any size sharing geographic areas that are planning, commissioning, managing, and assessing all or any element of its community infrastructures. However, the selection and the importance of metrics or (key) performance indicators of community infrastructures is a result of the application of this Technical Specification and depends on the characteristics of each community.
In this Technical Specification, the concept of smartness is addressed in terms of performance relevant to technologically implementable solutions, in accordance with sustainable development and resilience of communities as defined in ISO/TC 268.
2 Normative references There are no normative references.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 community
group of people with an arrangement of responsibilities, activities and relationships
Note ito entry: In the context of this Technical Specification, a community shares geographic areas.
[SOURCE: ISO 24510:2007, 2.7, modified and adapted to sustainable development and resilience of communities.]
3.2 community infrastructure
system of facilities. equipment and services that support the operations and activities of communities
Note 1 to entry: Such community infrastructures include, but are not limited to, energy, water, transportation, waste and information and communication technologies (ICT).
[SOURCE: ISO 9000:2005, 3.3.3 “infrastructure7 modified and adapted to communities.]
3.3 smart community infrastructure community infrastructure with enhanced technological performance that is designed, operated, and maintained to contribute to sustainable development and resilience of the community
Note Ito entry: It is the community infrastructure that is considered to be “smart” in this Technical Specification and not the community.
Note 2 to entry: Sustainable development tends to require community infrastructures that meet multiple, often contradictory, needs at a same time.
Note 3 to entry: Information and communication technologies (ICT) is an enabler but not a precondition for achieving smart community infrastructures.
3.4 susta inability state of the global system, including environmental, social and economic aspects, in which the needs of the present are met without compromising the ability of future generations to meet their own needs.ISO/TS 37151 pdf free download.
Tags: Smart community infrastructures
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…