ISO/TR 14047-2012 pdf free.Environmental management – Life cycle assessment – Illustrative examples on how to apply ISO 14044 to impact assessment situations.
The purpose of this Technical Report is to provide examples to illustrate current practice of life cycle impact assessment according to ISO 14044:2006. These examples are only a sample of all possible examples that could satisfy the provisions of ISO 14044. They offer “a way” or “ways” rather than the “unique way” of applying ISO 14044. They reflect the key elements of the life cycle impact assessment (LCIA) phase of the LCA. The examples presented in this Technical Report are not exclusive and other examples exist to illustrate the methodological issues described.
2 Organization of examples in this Technical Report
2.1 Mandatory and optional elements
The general framework of the LCIA phase is composed of several mandatory elements that convert Life Cycle Inventory (LCI) results to indicator results. In addition, there are optional elements for normalization, grouping or weighting of the indicator results and data quality analysis techniques for assisting the interpretation of the results.
2.2 Scope of examples
The examples provided within this Technical Report illustrate and support the methodology specified in ISO 14044:2006, 4.4. The coverage is indicated in Table 1.
2.3 Organization of document and route map
The structure of this Technical Report departs from a more recognized approach used in ISO standards since it provides examples about applications of ISO 14044:2006. It would help visualize better the structure of this Technical Report considering Example 1 as the trunk of a tree which runs through clauses pertaining LCIA both for its mandatory and optional elements. It of course uses its own set of LCI data. Examples 2 to 5 could be considered 4C branches addressing specific different applications of the mandatOry elements of LCIA. Example 2 extends into the optional element of normalization. Each of these examples Is based on Its own set of LCI data. Examples 6 to 8 are also branches addressing specific applications of the optional elements of the LCIA. Figure 1 lays the structure out in a flow diagram.ISO/TR 14047 pdf download.
Tags: Environmental management
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…