ISO 56003-2019 pdf free.Innovation management – Tools and methods for innovation partnership – Guidance.
This document provides a guidance for innovation partnerships. It describes the innovation partnership
framework (see Clause 4 to Clause 8) and the sample corresponding tools (see Annex A to Annex E) to
— decide whether to enter an innovation partnership,
— identify, evaluate and select partners.
— align the perceptions of value and challenges of the partnership.
— manage the partner interactions.
The guidance provided by this document is relevant for any type of partnerships and collaborations and it is intended to be applicable to any organizations, regardless of its type, size, product/service provided, such as:
a) start-ups collaborating with larger organizations;
b) SMEs or larger organizations;
c) private sector entities with public or academic entities;
d) public, academic or not-for-profit organizations.
Innovation partnerships start with a gap analysis, followed by the identification, and engagement, of potential innovation partners and the governance of their interaction.
NOTE The essence of an innovation partnership is for all parties to mutually benefit from working together in the context of an opportunity for innovation.
This document is not applicable to organizations seeking innovation by merger or acquisition.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
4.1 Framework
As described in Figure 1, this document proposes a structured approach and the corresponding tools in Annex A to Annex E. It can be used at any stage of its innovation process by a single organization to
一decide whether or not to enter an innovation partnership (see Clause 5),
一identify and select partners (see Clause 6),
align partners and agree on a common understanding (see Clause Z),
assign roles, responsibilities and govern the interaction (see Clause 8).
Throughout the process, a continuous review should be carried out and actions adapted according to the performance evaluation criteria drawn from ISO 56002:- 1), 9.1.1.1 and 9.1.1.2 and presented in Annex E.
Entering into an innovation partnership is not a linear process. Organizations may enter the innovation partnership process at any point, depending on their circumstances. For instance:
if an organization has already decided the reason to enter an innovation partnership, it can skip Clause 5 and start from Clause 6;
一if an organization has already identified or been identified by potential partners, it can skip Clauses 5 and 6 and start from Clause z;
一if an organization is already aligned with partners, it can start from Clause 8.ISO 56003 pdf download.
Tags: Innovation management
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…