ISO 12813-2015 pdf free.Electronic fee collection – Compliance check communication for autonomous systems.
ISO 12813 defines 1-equirements for short-range communication for the PuPOSCS
of compliance checking in autonomous electronic fcc-collecting systems. Compliance checking commuiiication (CCC) takes place between a road vehicle’s on—board equipment (OBE) and an outside interrogator (road—side mounted equipment. mobile device or hand—held tin it). and serves to establish whet her the data that are delivered by the oi*: correctly reflect the road usage of the corresponding veli ide according to I ha’ rules of the pertinent toll regime.
The operator of the compliance checking interrogator is assumed to be part of the toll charging role as defined in ISO 17573. The CCC permits identification of the 01W. vehicle and contract, and verification of whether the driver has lullilled his obligations and the checking status and performance of the OBK. The CCC reads, but does not write, OBl data.
This International Standard is applicable to OHl in an autonomous mode of operation; it is not applicable to compliance checking in dedicated short-range communication (DSRC )-based charging systems.
It defines data syntax and semantics, hut does not define a communication sequence. All the attributes defined herein arc required in any OIIE claimed to be compliant with this International Standard, even if some values are set to snot defined” in cases where certain lunctionality is not present in an OBE. The Interrogator is free to choose which attributes are read, as well as the sequence in which they are read. In order to achieve compatibility with existing systems, the conlllulnication makes use of the attributes defined in ISO 14906 wherever useful.
The CCC is suitable for a range of short-range communication media. Specific definitions arc given for (he CFN-DSRC as specified in EN 15509, as well as for the use of ISO CALM 1R. the Italian DSRC as specified in ETSI ES 200 674-1 and ARIB DSRC as alternatives to the CEN-DSRC. The attributes and functions defined are for compliance checking by iiieans of the [)SRC comnninication services provided by I)SRC layer 7, with the CCC attributes and functions made available to the CCC applications at the road-side equipment (RSE) and 011K. The attributes and functions are defined on the level of application data units (ADU ).
The definition of the CCC includes:
— the application interface between ORE and RSI- (as depicted in Figuri 2),
— use of the generic DSRC application layer as specified in ISO 15628 and EN 12834,
— use of the CKN-DSHC stack as specified in EN 15509,or other equivalent L)SRC stacks as described in Annetc C 1) and F, and
— security services for mutual authentication of the communication partners and for signing of data (see Antw U.).
CCC data type specifications are given in Annv A, protocol implementation conforniance statement (PICS) prolorma in Ann H. An example CCC transaction is presented in Annex F. The inforiuat ive Aniw H highlights how to use this International Standard [or the European electronic toll service (as defined in Commission Decision 2009/750/EC).ISO 12813 pdf free download.
Tags: Electronic fee collection
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…