BS EN ISO 9687:2015 pdf free.Dentistry一Graphical symbols for dental equipment.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
Iso 639-1, Codes for the representation of names of languages — Part 1: Alpha-2 code ISO 1942, Dentistry — Vocabulary
ISO 8601, Data elements and interchange formats — Information interchange — Representation of dates and times
ISO 15223-1:2012, Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements
ISO 17724, Graphical symbols — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1942, ISO 15223-1 and ISO 17724 apply.
4 Requirements
4.1 General
Graphical symbols used to convey the information given in Clause 5 are given in this International Standard.
In orderto arrange for the user of this International Standard all symbols necessary for dental equipment are shown in this International Standard. Therefore, some symbols defined by other International Standards are given for information purposes together with a reference to the respective International Standard.
4.2 Use of graphical symbols
These graphical symbols are intended to replace text, e.g. on the labels of dental equipment and accessories. The use of symbols presented in the tables below is up to the discretion of the manufacturer. These symbols can be used for labelling of the packaging of dental equipment and accessories, in the manufacturer’s instructions for use, in catalogues and leaflets and for similar purposes. The use of these symbols is possible without further explanation of the symbols in the accompanying text.
4.3 Size of symbols
All graphical symbols and accompanying information shall be legible when viewed underan illumination of 215 lx using normal vision without magnification at a distance, which takes into account the specifics and size of the individual dental equipment and/or its package.
NOTE Colours and minimum dimensions are not specified in this International Standard.
The meaning of each graphical symbol may depend upon its orientation in a given reference system and care should be taken to avoid ambiguity (e.g. by rotating or mirroring).
4.4 Representation of names of languages and dates
The language code used for the representation of names of languages shall be the two-letter code (alpha-2 code) in accordance with Iso 639-1.
The data code used for representation of dates shall be in accordance with Iso 8601.BS EN ISO 9687 pdf download.
Tags: Dentistry
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…