AS ISO 6015:2021 pdf free.Earth-moving machinery一Hydraulic excavators and backhoe loaders – Methods of determining tool forces.
AS ISO 6015 specifies methods for measuring and calculating the tool forces of earth- moving attachments fitted to hydraulic excavators and the hoe equipment of backhoe loaders. It is applicable to hydraulic excavators and backhoe loaders as defined in Iso 6165.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 60 16:1998, Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
ISO 6165, Earth-moving machinery — Basic types — ldentqication and terms and definitions ISO 6746-1:2003, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 7135:1993, Earth-moving machinery — Hydraulic excavators — Terminology and commercial specifications
ISO 7451:1997, Earth-moving machinery — Volumetric ratings for hyd raulic excavator buckets and backhoe loader buckets
ISO 7546:1983, Earth-moving machinery — Loader and front loading excavator buckets — Volumetric ratings
ISO 9248:1992, Earth-moving machinery — Units for dimensions, performance and capacities, and their measurement accuracies
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 tool force
force generated at the bucket lip or cutting edge, but not at the tips of the teeth, when operating the bucket or arm cylinders independently
3.2 arm cylinder tool force
force generated at the bucket lip with the arm cylinder positioned to provide a rotating moment around the arm pivot
Note 1 to entry: The bucket lip moves towards the base machine when hoe equipment is used.
3.3 arm cylinder tool force at level crowd
(shovel equipment) horizontal arm cylinder tool force generated by the arm cylinder at the bucket lip when the bucket”s attitude is level and maintained parallel to the ground line and the lip is at the ground line.AS ISO 6015 pdf free download.
Tags: Hydraulic excavators and backhoe loaders
-
AS/NZS 60335.2.11:2020 pdf free download.Household and similar electrical appliances- Safety Part 2.11: Particular requirements for tumble dryers (IEC 60335-2-11 Ed 8, MOD). 7.10 Addition: If the off position is only indicated by letters, the word “off” shall be used. 7.12 Addition: The instructions shall state — the maximum mass of dry textile material in kilograms to be used in the appliance; — that the tumble dryer is not to be used if industrial chemicals have been used for cleaning; — that the lint trap has to be cleaned frequently, if applicable; — that lint must not to be allowed to accumulate around the tumble dryer (not applicable for appliances intended to be vented to the exterior of the building); — that adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires (this instruction is not required if the tumble dryer discharges the air into the room). If symbol ISO 7000-0790 (2004-01) is used, its meaning shall be explained. The instructions shall include the substance of the following. — Do not dry unwashed items in the tumble dryer. — Items that have been soiled with substances such…
-
AS ISO 37100:2020 pdf free download.Sustainable cities and communities 一Vocabulary. 1 Scope This document defines terms relating to sustainable development in communities, smart community infrastructure and related subjects. 2 Normative references There are no normative references in this document. 3 Terms and definitions ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at http://www.iso.orgJobp — IEC Electropedia: available at httwwwe1e1ropetha.orgJ 3.1 Terms relating to sustainable development, resilience and smartness 3.1.1 sustainability state of the global system, including environmental, social and economic aspects, in which the needs of the present are met without compromising the ability of future generations to meet their own needs Note I to entry: The environmental, social and economic aspects interact, are interdependent and are often referred to as the three dimensions of sustainability. Note 2 to entry: Sustainability is the goal of sustainable development. [SOURCE: ISO Guide 82:2014, 3.1] 3.1.2 sustainable development development that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needs Note ito entry: Derived from the Brundtland Report. Note 2 to entry: The Aalborg Charter provides further information on…
-
AS ISO 37104:2020 pdf free.Sustainable cities and communities – Transforming our cities一Guidance for practical local implementation of AS IsO 37101. This document provides guidance on how to implement and maintain a management system for sustainable development based on ISO 37101 principles, specifically in the context of cities, but applicable to other forms of settlement. This document: — provides guidance for practical implementation ofa managernentsystem for sustainable development in cities and other settlements, based on ISO 37101; — establishes a methodological framework forthe systematic evaluation ofthe sustainable development schemes and achievements in the city or other settlements, based on the cross-analysis of the six purposes of sustainability and the 12 areas of action of ISO 37101; — illustrates how other International Standards can be used to support successful implementation of ISO 37101, including, in particular, ISO 37120 (which recommends a suite of city indicators mapped against the six purposes of ISO 37101) and ISO 37106 (which provides practical guidance on how to implement joined-up delivery and innovation across organizational boundaries within the city or settlement). This document is intended for organizing bodies, decision-makers, executive officers and managers in cities — usually, in the first instance, the relevant local governments. This document…