ISO 3600-2015 pdf free.Tractors, machinery for agriculture and forestry, powered lawn and garden equipment一Operator’s manuals一Content and format.
ISO 3600- specifies the content and gives guidance on the format of operator’s manuals for tractors, machinery for agriculture and forestry, and powered lawn and garden equipment. It Is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals. Manuals intended for use by a service technician are not within the scope of this International Standard.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 11684, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles
3 Terms and definitions
For the purpose of this document, the following terms and definitions apply.
3.1 operator
person using the machine for the purpose intended by the manufacturer and complying with the information for operation, including safety practices, as specified by the manufacturer in the operator’s manual and by signs on the machine
3.2 normal operation and service
use of the machine for the purpose intended by the manufacturer by an operator
3.3 service technician
person specifically trained to service, maintain, diagnose problems, and repair the machine
4 Content of operator’s manuals
4.1 Basic information
4.1.1 General
The information specified in 412 through 412 shall be included as appropriate and applicable to the machine. It is recommended that the information be presented in the order shown in 4J.2 through 4LL9 but deviations may be made to suit particular machines or situations.
4.1.2 ldentification of manual
4.1.2.1 The following information shall be shown on the front cover:
— name or type of publication;
— model number, model name, or type designation of machine.
4.1.2.2 The following information shall be provided:
— manufacturer or distributor of machine, including contact information;
— part number or publication number by which the manual can be ordered;
— printing or publication date, or revision level or a publication code, that can be used to identify the publication date or revision level.
4.1.3 Contents
4.1.3.1 Table of contents shall list, as a minimum, the main sections of the manual with the page number of the first page of each section.
4.1.3.2 Contents list of each main section, if applicable, shall be included in the table of contents or at the beginning of the section to which the contents list applies, or both.
4.1.4 Identification of machine
The following information shall be included:
— model designations of the machines to which the manual applies;
— serial numbers, serial number range. or beginning serial number of the range to which the manual applies, as appropriate;
— description, either by words or pictorially, or both, of the location of serial numbers of the machine and of serialized components;
— spaces to record serial numbers pertaining to the particular machine the manual accompanies.
4.1.5 Introduction
The following information shall be included:
— statement of the importance of the information given in the manual and the necessity for all operators to read the manual and to understand the information contained in the manual;
— information regarding the functions for which the machine is designed (intended use);
— any information to aid the correct interpretation of the information given in the manual.ISO 3600 pdf free download.
Tags: Content and format
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…