ISO 6347-2017 pdf free.Textile floor coverings – Consumer in forma tion.
This document specifies the technical subjects that form the basis for the provision of information, at the point of sale, for consumer guidance prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 1765, Machine-made textile floor coverings — Determination of thickness ISO 2076, Textiles — Man-made fibres — Generic names
ISO 3018, Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions ISO 6938, Textiles — Naturalfibres — Generic names and definitions
ISO 8543, Textile floor coverings — Methods for determination of mass
ISO 24342, Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http/Jwww.iso.org/obp
4 Product specifications to be provided to the consumer
4.1 Essential information
4.1.1 General
Essential information shall be provided, along with the textile floor covering, at all stages from manufacturer to consumer. The manufacturer or his authorized representative shall provide the following minimum information to each consumer with each textile floor covering. The manufacturer’s tolerances shall be included.
4.1.2 Means of identifying the responsible supplier
This information shall contain the name of the manufacturer or his authorized representative, brand name and trade mark.
4.1.3 A commercial reference
Information which positively and uniquely identifies the individual textile floor covering within the
supplier’s range, i.e. style name and/or style number.
4.1.4 Type and fibre content of use-surface
Man-made fibres shall be identified in accordance with ISO 2076. Natural fibres shall be identified in
accordance with ISO 6938.
When analysis of fibre contents is required, it shall be in accordance with ISO 1833-1 to ISO 1833-26. Attention is drawn to national legislation having requirements for labelling textiles according to fibre content.
4.1.5 Dimensions
The length and width of rectangular textile floor coverings sold as rugs or mats, and the width of those sold as a single piece (e.g. runners or wall-to-wall floor covering) shall be determined in accordance with ISO 3018.
The side length, edge straightness and squareness of textile floor covering tiles, sold as modular carpet tiles, shall be determined in accordance with ISO 24342.
4.1.6 Total thickness
Total thickness shall be determined in accordance with ISO 1765.
4.1.7 Total mass per unit area
Total mass per unit area shall be determined in accordance with ISO 8543.
4.2 Optional information
Optional information relating to the textile floor covering shall be provided in a leaflet, or other form,
at the request of the purchaser.
Annex A lists the items of optional Information, some or all of which should be provided.ISO 6347 pdf free download.
Tags: Textile floor coverings
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…