AS 12508:2021 pdf free.Earth-moving machinery一Operator station and maintenance areas – – Bluntness of edges (ISO 12508:1994, MOD).
AS 12508 defines the permissible limits of the sharpness of edges and corners, to reduce the risk of injury to the operator or maintenance personnel while operating earth-moving machinery and performing maintenance. It applies to operator and maintenance access/egress systems as defined in ISO 2860 and ISO 2867, and the operator station on earth-moving machinery as described in ISO 6165.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
ISO 2860:1992, Earth-moving machinery — Minimum access dimensions.
ISO 2867: 1994, Earth-moving machinery —Access systems.
ISO 6165:1987, Earth-moving machinery — Basic types — Vocabulary.
3 Requirements
Structural edges and corners (see figure 1) of metallic and non-metallic materials of sufficient hardness to cause contusions or penetration of the human skin shall comply with the requirements in 11 to 3.3.
3.1 Edges of parts shall be rounded or chamfered to a minimum dimension of 0,3 mm as shown in figure 2. or fitted with a protective strip. For edge thicknesses of 1 mm or less, a protective strip shall be fitted.
3.2 External corners such as on cab or service doors and pointed objects shall have a minimum radius of 4 mm.AS 12508 pdf free download.
Tags: Earth-moving machinery
-
AS/NZS 60335.2.11:2020 pdf free download.Household and similar electrical appliances- Safety Part 2.11: Particular requirements for tumble dryers (IEC 60335-2-11 Ed 8, MOD). 7.10 Addition: If the off position is only indicated by letters, the word “off” shall be used. 7.12 Addition: The instructions shall state — the maximum mass of dry textile material in kilograms to be used in the appliance; — that the tumble dryer is not to be used if industrial chemicals have been used for cleaning; — that the lint trap has to be cleaned frequently, if applicable; — that lint must not to be allowed to accumulate around the tumble dryer (not applicable for appliances intended to be vented to the exterior of the building); — that adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires (this instruction is not required if the tumble dryer discharges the air into the room). If symbol ISO 7000-0790 (2004-01) is used, its meaning shall be explained. The instructions shall include the substance of the following. — Do not dry unwashed items in the tumble dryer. — Items that have been soiled with substances such…
-
AS ISO 37100:2020 pdf free download.Sustainable cities and communities 一Vocabulary. 1 Scope This document defines terms relating to sustainable development in communities, smart community infrastructure and related subjects. 2 Normative references There are no normative references in this document. 3 Terms and definitions ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at http://www.iso.orgJobp — IEC Electropedia: available at httwwwe1e1ropetha.orgJ 3.1 Terms relating to sustainable development, resilience and smartness 3.1.1 sustainability state of the global system, including environmental, social and economic aspects, in which the needs of the present are met without compromising the ability of future generations to meet their own needs Note I to entry: The environmental, social and economic aspects interact, are interdependent and are often referred to as the three dimensions of sustainability. Note 2 to entry: Sustainability is the goal of sustainable development. [SOURCE: ISO Guide 82:2014, 3.1] 3.1.2 sustainable development development that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needs Note ito entry: Derived from the Brundtland Report. Note 2 to entry: The Aalborg Charter provides further information on…
-
AS ISO 37104:2020 pdf free.Sustainable cities and communities – Transforming our cities一Guidance for practical local implementation of AS IsO 37101. This document provides guidance on how to implement and maintain a management system for sustainable development based on ISO 37101 principles, specifically in the context of cities, but applicable to other forms of settlement. This document: — provides guidance for practical implementation ofa managernentsystem for sustainable development in cities and other settlements, based on ISO 37101; — establishes a methodological framework forthe systematic evaluation ofthe sustainable development schemes and achievements in the city or other settlements, based on the cross-analysis of the six purposes of sustainability and the 12 areas of action of ISO 37101; — illustrates how other International Standards can be used to support successful implementation of ISO 37101, including, in particular, ISO 37120 (which recommends a suite of city indicators mapped against the six purposes of ISO 37101) and ISO 37106 (which provides practical guidance on how to implement joined-up delivery and innovation across organizational boundaries within the city or settlement). This document is intended for organizing bodies, decision-makers, executive officers and managers in cities — usually, in the first instance, the relevant local governments. This document…