AS ISO 10987.3:2021 pdf free.Earth-moving machinery一Sustainability Part 3: Used machines.
This document gives requirements and relevant information for evaluating used earth-moving machines.
It provides the means to evaluate a used machine, relative to the information provided by the manufacturer in the operator’s manual, in order to verify that the used machine is functional as intended by the manufacturer.
This document is applicable to earth-moving machines as defined in ISO 6165 that are used and are planned to be resold.
NOTE The used machine might not meet all current standards and regulations (e.g. roading and hazardous environments).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6165, Earthmoving machinery — Basic types — Identification and terms and definitions ISO 10987, Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6165, ISO 10987 and the following apply.
4.1 General
The requirements in this clause are provided to allow the owner, seller or their representative to evaluate used machines relative to the information provided by the manufacturer in the machine operator’s manual to verify that the used machine is functioning as intended by the manufacturer.
An inspection form for used machines in four sections (see example in Annex A) may be used to provide information on the machine under inspection.
a) The upper section of the first page provides specific identification of the used machine.
b) The middle section of the first page provides a checklist to document the results of a used machine inspection. A check in the box by each inspection item indicates that the used machine is functioning properly as intended by the manufacturer as stated in the operator’s manual.
c) The lower section of the first page has information about the inspection person.
d) The section on the second page provides a detailed inspection list based on this document’s requirements.
4.2 General requirements
The owner, seller or their representative shall evaluate the used machine and verify the following.
a) The labels and symbols for the machine are in accordance with the operator’s manual and are readable. The labels include the lubrication diagram, if the manufacturer supplied one on the machine when new.
b) Control devices function as specified in the control information in the machine operator’s manual.
c) The machine is able to start correctly.
d) Equipment and attachments are in acceptable condition and function as specified in the operator’s manual.
e) All hydraulic cylinders and rotary mechanisms operate correctly when the engine is running at idle.
f) The moving parts function as intended without abnormal noise.
g) The powertrain system functions and changes speeds smoothly without abnormal smoke or abnormal noise.
h) The engine functions without leakage from the lubrication, cooling, intake, exhaust and fuel delivery systems. Slight leakage is acceptable.AS ISO 10987.3 pdf free download.
Tags: Used machines
-
AS/NZS 60335.2.11:2020 pdf free download.Household and similar electrical appliances- Safety Part 2.11: Particular requirements for tumble dryers (IEC 60335-2-11 Ed 8, MOD). 7.10 Addition: If the off position is only indicated by letters, the word “off” shall be used. 7.12 Addition: The instructions shall state — the maximum mass of dry textile material in kilograms to be used in the appliance; — that the tumble dryer is not to be used if industrial chemicals have been used for cleaning; — that the lint trap has to be cleaned frequently, if applicable; — that lint must not to be allowed to accumulate around the tumble dryer (not applicable for appliances intended to be vented to the exterior of the building); — that adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires (this instruction is not required if the tumble dryer discharges the air into the room). If symbol ISO 7000-0790 (2004-01) is used, its meaning shall be explained. The instructions shall include the substance of the following. — Do not dry unwashed items in the tumble dryer. — Items that have been soiled with substances such…
-
AS ISO 37100:2020 pdf free download.Sustainable cities and communities 一Vocabulary. 1 Scope This document defines terms relating to sustainable development in communities, smart community infrastructure and related subjects. 2 Normative references There are no normative references in this document. 3 Terms and definitions ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at http://www.iso.orgJobp — IEC Electropedia: available at httwwwe1e1ropetha.orgJ 3.1 Terms relating to sustainable development, resilience and smartness 3.1.1 sustainability state of the global system, including environmental, social and economic aspects, in which the needs of the present are met without compromising the ability of future generations to meet their own needs Note I to entry: The environmental, social and economic aspects interact, are interdependent and are often referred to as the three dimensions of sustainability. Note 2 to entry: Sustainability is the goal of sustainable development. [SOURCE: ISO Guide 82:2014, 3.1] 3.1.2 sustainable development development that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needs Note ito entry: Derived from the Brundtland Report. Note 2 to entry: The Aalborg Charter provides further information on…
-
AS ISO 37104:2020 pdf free.Sustainable cities and communities – Transforming our cities一Guidance for practical local implementation of AS IsO 37101. This document provides guidance on how to implement and maintain a management system for sustainable development based on ISO 37101 principles, specifically in the context of cities, but applicable to other forms of settlement. This document: — provides guidance for practical implementation ofa managernentsystem for sustainable development in cities and other settlements, based on ISO 37101; — establishes a methodological framework forthe systematic evaluation ofthe sustainable development schemes and achievements in the city or other settlements, based on the cross-analysis of the six purposes of sustainability and the 12 areas of action of ISO 37101; — illustrates how other International Standards can be used to support successful implementation of ISO 37101, including, in particular, ISO 37120 (which recommends a suite of city indicators mapped against the six purposes of ISO 37101) and ISO 37106 (which provides practical guidance on how to implement joined-up delivery and innovation across organizational boundaries within the city or settlement). This document is intended for organizing bodies, decision-makers, executive officers and managers in cities — usually, in the first instance, the relevant local governments. This document…