AS/NZS 4024.2803:2021 pdf free.Safety of machinery Part 2803: Electro-sensitive protective equipment一General requirements and tests (IEC 61496-1 :2020 (ED 4.0) MOD).
This part of IEC 61496 specifies general requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons or part of a person as part of a safety-related system. Special attention is directed to functional and design requirements that ensure an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A.
NOTE “Non-contacr means that physical contact is not required for sensing.
This document is intended to be used with a subsequent part of IEC 61496 that provides
particular requirements based on the sensing technology.
EXAMPLE This document and IEC 61496-2 are used for AOPDS; this document and IEC 61496-3 are used for
AOPDDRs.
Where a part covering the sensing technology does not exist, IEC TS 62998-1 is used.
Where the IEC 61496 series does not contain all necessary provisions, IEC TS 62998-1 is used.
It is an additional possibility to combine those aspects covered by the IEC 61496 series in addition to IEC TS 62998-1.
This document does not specify the dimensions or configuration of the detection zone and its disposition in relation to hazards in any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine.
While a data interface can be used to control optional safety-related ESPE functions (Annex A), this document does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example, IEC 61508 (all parts), IEC 62046, IEC 62061, and ISO 13849-1).
This document can be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials that have to be recognized by the sensing function have different properties from those of persons.
This document does not deal with requirements for ESPE functions not related to the protection of persons (e.g. using sensing unit data for navigation).
This document does not deal with electromagnetic compatibility (EMC) emission requirements.AS/NZS 4024 pdf free download.
Tags: Safety of machinery
-
AS/NZS 60335.2.11:2020 pdf free download.Household and similar electrical appliances- Safety Part 2.11: Particular requirements for tumble dryers (IEC 60335-2-11 Ed 8, MOD). 7.10 Addition: If the off position is only indicated by letters, the word “off” shall be used. 7.12 Addition: The instructions shall state — the maximum mass of dry textile material in kilograms to be used in the appliance; — that the tumble dryer is not to be used if industrial chemicals have been used for cleaning; — that the lint trap has to be cleaned frequently, if applicable; — that lint must not to be allowed to accumulate around the tumble dryer (not applicable for appliances intended to be vented to the exterior of the building); — that adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires (this instruction is not required if the tumble dryer discharges the air into the room). If symbol ISO 7000-0790 (2004-01) is used, its meaning shall be explained. The instructions shall include the substance of the following. — Do not dry unwashed items in the tumble dryer. — Items that have been soiled with substances such…
-
AS ISO 37100:2020 pdf free download.Sustainable cities and communities 一Vocabulary. 1 Scope This document defines terms relating to sustainable development in communities, smart community infrastructure and related subjects. 2 Normative references There are no normative references in this document. 3 Terms and definitions ISO and IEC maintain terminological databases for use in standardization at the following addresses: — ISO Online browsing platform: available at http://www.iso.orgJobp — IEC Electropedia: available at httwwwe1e1ropetha.orgJ 3.1 Terms relating to sustainable development, resilience and smartness 3.1.1 sustainability state of the global system, including environmental, social and economic aspects, in which the needs of the present are met without compromising the ability of future generations to meet their own needs Note I to entry: The environmental, social and economic aspects interact, are interdependent and are often referred to as the three dimensions of sustainability. Note 2 to entry: Sustainability is the goal of sustainable development. [SOURCE: ISO Guide 82:2014, 3.1] 3.1.2 sustainable development development that meets the environmental, social and economic needs of the present without compromising the ability of future generations to meet their own needs Note ito entry: Derived from the Brundtland Report. Note 2 to entry: The Aalborg Charter provides further information on…
-
AS ISO 37104:2020 pdf free.Sustainable cities and communities – Transforming our cities一Guidance for practical local implementation of AS IsO 37101. This document provides guidance on how to implement and maintain a management system for sustainable development based on ISO 37101 principles, specifically in the context of cities, but applicable to other forms of settlement. This document: — provides guidance for practical implementation ofa managernentsystem for sustainable development in cities and other settlements, based on ISO 37101; — establishes a methodological framework forthe systematic evaluation ofthe sustainable development schemes and achievements in the city or other settlements, based on the cross-analysis of the six purposes of sustainability and the 12 areas of action of ISO 37101; — illustrates how other International Standards can be used to support successful implementation of ISO 37101, including, in particular, ISO 37120 (which recommends a suite of city indicators mapped against the six purposes of ISO 37101) and ISO 37106 (which provides practical guidance on how to implement joined-up delivery and innovation across organizational boundaries within the city or settlement). This document is intended for organizing bodies, decision-makers, executive officers and managers in cities — usually, in the first instance, the relevant local governments. This document…