ISO 15370-2021 pdf free download.Ships and marine technology一Low – location lighting (LLL) on passenger ships – Arrangement.
This document specifies the requirements for the approval, installation and maintenance of lowlocat ion lighting systems as defined in Chapter 11-2, Regulation 13.3.2.5.1 of the International Convention for the Safety of Life at Sea, 1974 (SOLAS 74), as amended in 2000, and detailed in Chapter 11 of the International Code for Fire Safety Systems (FSS Code).
2 Normative references
The following referenced documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 2919:2012, Radiological protectfon — Sealed radioactive sources — General requirements and classification
ISO 3795, Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
ISO 16069:2017, Graphical symbols — Safety signs — Safety way guidance systems (SWGS)
ISO 24409-1, Ships and marine technology — Design, location and use of shipboard safety signs, fire control
plan signs, safety notices and safety markings — Part 1: Design principles
ISO 24409-2, Ships and marine technology — Design, location, and use of shipboard safety signs, fire control plan signs, safety notices and safety markings — Part 2: Catalogue of shipboard safety signs and fire control plan signs
I EC 60529, Degrees of protection provided by enclosures (IP Code)
IEC 60598-2-22, Luminaires — Part 2-22: Particular requirements — Luminaires for emergency bghtin,q
I EC 60945, Marine navigation and radiocommunication equipment and systems — General requirements — Met hods of testing and required test results
I MO, International Convention for the Safety of Life at Sea, 1974 (SOLAS 74), as amended
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/bp
— IEC Electropedia: available at http://www.electropedia.org/
3.1 accommodation spaces
passenger and crew spaces used for public spaces, cabins, offices, hospitals, cinemas, lounges, barber shop, pantries containing no cooking appliances, corridors, toilets and similar spaces
Note Ito entry: This definition is consistent with the one given by IMO SOLAS 11-2/3.1.
3.2 approval
formal acceptance of the product and arrangement issued by the competent authority (14)
3.3 assembly station
distinct and designated internal or external space for mustering and marshalling passengers and crew arranged in the vicinity of, and permitting ready access for the passengers and crew to, the embarkation stations
Note I to entry: The assembly station can also be the embarkation station.
3.4 competent authority
administration whose flag the ship is entitled to fly, or an organization authorized by that administration to perform functions required by this document
3.5 dead-end corridor
corridor, or part of a corridor, whose depth is greater than its width, and from which there is only one escape route (12)
3.6 EPsystem
electrically powered system
LLL system (112) that requires electrical power for its operation, such as systems using incandescent bulbs, light-emitting diodes, electroluminescent strips or lamps, electrofluorescent lamps, or other electrically powered light-emitting material
3.7 escape route
designated route, principally along corridors, stairways and through exits, by which people can be directed to an assembly station (j.3) and/or to a lifesaving appliances embarkation station.ISO 15370 pdf download.
Tags: Ships and marine technology
-
ISO 8600-1-2013 pdf free download.Endoscopes – Medical endoscopes and endotherapy devices – Part 1: General requirements. 6 Marking 6.1 Minimum marking Iach individual endoscope or endotherapy device shall have the lollowing minimum marking: a) model number and/or other mark sufficient to identify the endoscope or endotherapy device and its manufacturer; b) maximum insertion portion width, minimum instrument channel width, working length, field of view and/or direction of view where such identification is necessary for the intended use of the endoscope or endotherapy device. The Insertion portion width and instrument channel width units shall be in millimetres. The insertion portion width and instrument channel width can also be marked in French size as defined in 3.5, shown by either ‘Fr or an encircled number; c) wherever reasonable and practicable. the endoscope or endotherapy device and detachable component(s) shall be identified in terms of lot numbers or serial numbers, etc. 6.2 Marking legibility The marking shall remain legible over the lifetime of the device when the endoscope or endotherapy device is used, cleaned, disinlected, sterilized and stored in accordance with the instruction manual. 6.3 Marking exceptions When marking on the endoscope or endotherapy device or detachable component(s) is impossible to achieve due…
-
ISO 15688-2012 pdf free download.Road construction and maintenance equipment – Soil stabilizers 一 Terminology and commercial specifications. This International Standard establishes the terminology, definitions of operation and commercial specifications for soil stabilizers and their components intended for use in road construction and pavement works. It does not apply to soil stabilizers used in agricultural applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.. ISO 3911, Wheels and rims for pneumatic tyres — Vocabulary, designation and marking ISO 6746-1, Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine ISO 6746-2, Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments ISO 7134. Earth-moving machinery — Graders — Terminology and commercial specifications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 soil stabilizer self-propelled machine, either towed or transported, with the function of pulverizing, breaking-up, aerating, homogenizing, and loosening existing and imported soil or paving materials and mixing them…
-
ISO 18436-1-2012 pdf free.Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel一 Part 1: Requirements for assessment bodies and the assessment process. 5 Requirements for assessment body personnel 5.1 General provisions In order to ensure that the assessment process is carried out effectively and uniformly, the competence requirements for personnel involved in the entire process shall be defined by the assessment body and, in the case of a third party, be approved by the responsible TCC (in accordance with ISO/IEC 17024). The assessment body shall require its personnel (internal or external) to sign a contract, or other document, by which they commit themselves to comply with the rules defined by the assessment body, including those relating to confidentiality and those relating to independence from commercial and other interests, and from any prior or present link with the persons to be examined that would, in the opinion of the interested parties, compromise impartiality. Clearly documented instructions shall be available to the personnel, describing their duties and responsibilities. These instructions shall be maintained up to date. All personnel involved in any aspect of assessment activities shall possess appropriate educational qualifications, experience and technical expertise, which satisfy defined…